installed printer - PMC

Aleksandr B. Stefaniak, Lauren N. Bowers, Gabe Cottrell, Ergin Erdem, Alycia K. Knepp, Stephen Martin, Jack Pretty, Matthew G. Duling, Elizabeth D. Arnold, Zachary Wilson, Benjamin Krider, Ryan F. LeBouf, M. Abbas Virji, Arif Sirinterlikci

J Chem Health Saf. Author manuscript; available in PMC 2022 Aug 31.

Published in final edited form as: J Chem Health Saf. 2021 Aug 31; 28(6): 444–456. doi: 10.1021/acs.chas.1c00041

PMCID:: PMC9377640

Article PDF–1.3M

Select item 66847534.

Ultra-Low-Cost 3D Bioprinting: Modification and Application of an Off-the-Shelf Desktop 3D-Printer for Biofabrication

Melanie Kahl, Markus Gertig, Phillipp Hoyer, Oliver Friedrich, Daniel F. Gilbert

Front Bioeng Biotechnol. 2019; 7: 184. Published online 2019 Jul 31. doi: 10.3389/fbioe.2019.00184

PMCID:: PMC6684753

Article PDF–2.4M

Select item 90412585.

Design and implementation of a low cost bio-printer modification, allowing for switching between plastic and gel extrusion

Adolf Krige, Jakub Haluška, Ulrika Rova, Paul Christakopoulos

HardwareX. 2021 Apr; 9: e00186. Published online 2021 Feb 26. doi: 10.1016/j.ohx.2021.e00186

PMCID:: PMC9041258

Article PDF–5.0M

Select item 88340836.

Development of a 3D Printer for the Manufacture of Functional Food Protein Gels

Stéphane Portanguen, Pascal Tournayre, Paul Gibert, Selma Leonardi, Thierry Astruc, Pierre-Sylvain Mirade

Foods. 2022 Feb; 11(3): 458. Published online 2022 Feb 3. doi: 10.3390/foods11030458

PMCID:: PMC8834083

Article PDF–6.5M

Select item 59674087.

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer

Aleksandr B. Stefaniak, Ryan F. LeBouf, Jinghai Yi, Jason Ham, Timothy Nurkewicz, Diane E. Schwegler-Berry, Bean T. Chen, J. Raymond Wells, Matthew G. Duling, Robert B. Lawrence, Stephen B. Martin, Jr., Alyson R. Johnson, M. Abbas Virji

J Occup Environ Hyg. Author manuscript; available in PMC 2018 May 24.

Published in final edited form as: J Occup Environ Hyg. 2017 Jul; 14(7): 540–550. doi: 10.1080/15459624.2017.1302589

PMCID:: PMC5967408

Article PDF–528K

Select item 94267528.

Designing Cost-Effective Open-Source Multihead 3D Bioprinters

David Chimene, Kaivalya A. Deo, Jeremy Thomas, Landon Dahle, Cole Mandrona, Akhilesh K. Gaharwar

GEN Biotechnol. August 2022; 1(4): 386–400. Published online 2022 Aug 18. doi: 10.1089/genbio.2022.0021

PMCID:: PMC9426752

Article PDF–1.3M

Select item 60977919.

Utilizing a low-cost desktop 3D printer to develop a “one-stop 3D printing lab” for oral and maxillofacial surgery and dentistry fields

Takashi Kamio, Kamichika Hayashi, Takeshi Onda, Takashi Takaki, Takahiko Shibahara, Takashi Yakushiji, Takeo Shibui, Hiroshi Kato

3D Print Med. 2018 Dec; 4: 6. Published online 2018 Aug 13. doi: 10.1186/s41205-018-0028-5

PMCID:: PMC6097791

Article PDF–1.5M

Select item 912345910.

Ender3 3D printer kit transformed into open, programmable syringe pump set

Sander Baas, Vittorio Saggiomo

HardwareX. 2021 Oct; 10: e00219. Published online 2021 Aug 3. doi: 10.1016/j.ohx.2021.e00219

PMCID:: PMC9123459

Article PDF–8.8M

Select item 845515311.

Reducing ultrafine particulate emission from multiple 3D printers in an office environment using a prototype engineering control

Kevin L. Dunn, Duane Hammond, Kevin Menchaca, Gary Roth, Kevin H. Dunn

J Nanopart Res. Author manuscript; available in PMC 2021 Sep 21.

Published in final edited form as: J Nanopart Res. 2020 May 8; 22(2): 10.1007/s11051-020-04844-4. doi: 10.1007/s11051-020-04844-4

PMCID:: PMC8455153

Article PDF–1.8M

Select item 584952512.

Moving Toward Rapid and Low-Cost Point-of-Care Molecular Diagnostics with a Repurposed 3D Printer and RPA

Kamfai Chan, Pui-Yan Wong, Chaitanya Parikh, Season Wong

Anal Biochem. Author manuscript; available in PMC 2019 Mar 15.

Published in final edited form as: Anal Biochem. 2018 Mar 15; 545: 4–12. Published online 2018 Jan 12. doi: 10.1016/j.ab.2018.01.008

PMCID:: PMC5849525

Article PDF–1.4M

Select item 1070981013.

A novel portable in situ printer for hydrogel multi-structure molding and cell printing

Huazhen Liu, Yi Zhang, Zhian Jian, Chuang Gao, Chunxiang Lu, Qiqi Dai, Hao Qiao, Yuanyuan Liu

APL Bioeng. 2023 Dec; 7(4): 046119. Published online 2023 Dec 6. doi: 10.1063/5.0176301

PMCID:: PMC10709810

Article PDF–8.2M

Select item 1028024614.

Assessing the cost and utilization of SMS printers by primary health care facilities: lessons learned from South Africa

Naseem Cassim, Floyd Olsen, Lynsey Stewart-Isherwood, Manuel Pedro da Silva, Wendy Susan Stevens

J Public Health Afr. 2023 Apr 30; 14(4): 2253. Published online 2023 Apr 19. doi: 10.4081/jphia.2023.2253

PMCID:: PMC10280246

Article PDF–225K

Select item 966830715.

Single-digit-micrometer-resolution continuous liquid interface production

Kaiwen Hsiao, Brian J. Lee, Tim Samuelsen, Gabriel Lipkowitz, Jason M. Kronenfeld, Dan Ilyn, Audrey Shih, Maria T. Dulay, Lee Tate, Eric S. G. Shaqfeh, Joseph M. DeSimone

Sci Adv. 2022 Nov; 8(46): eabq2846. Published online 2022 Nov 16. doi: 10.1126/sciadv.abq2846

PMCID:: PMC9668307

Article PDF–3.5M

Select item 900726216.

A digital twin ecosystem for additive manufacturing using a real-time development platform

Minas Pantelidakis, Konstantinos Mykoniatis, Jia Liu, Gregory Harris

Int J Adv Manuf Technol. 2022; 120(9-10): 6547–6563. Published online 2022 Apr 13. doi: 10.1007/s00170-022-09164-6

PMCID:: PMC9007262

Article PDF–2.0M

Select item 1099073117.

Modification of a desktop FFF printer via NIR laser addition for upconversion 3D printing

Adilet Zhakeyev, Rohith Devanathan, Jose Marques-Hueso

HardwareX. 2024 Jun; 18: e00520. Published online 2024 Mar 19. doi: 10.1016/j.ohx.2024.e00520

PMCID:: PMC10990731

Article PDF–13M

Select item 594851818.

Intelligent Fault Diagnosis of Delta 3D Printers Using Attitude Sensors Based on Support Vector Machines

Kun He, Zhijun Yang, Yun Bai, Jianyu Long, Chuan Li

Sensors (Basel) 2018 Apr; 18(4): 1298. Published online 2018 Apr 23. doi: 10.3390/s18041298

PMCID:: PMC5948518

Article PDF–2.3M

Select item 688988519.

Evaluation of emissions and exposures at workplaces using desktop 3-dimensional printer

A.B. Stefaniak, A.R. Johnson, S. du Preez, D.R. Hammond, J.R. Wells, J.E. Ham, R.F. LeBouf, K.W. Menchaca, S.B. Martin, Jr., M.G. Duling, L.N. Bowers, A.K. Knepp, F.C. Su, D.J. de Beer, J.L. du Plessis

J Chem Health Saf. Author manuscript; available in PMC 2019 Dec 3.

Published in final edited form as: J Chem Health Saf. 2019 Mar; 26(2): 19–30. doi: 10.1016/j.jchas.2018.11.001

PMCID:: PMC6889885

Article PDF–510K

Select item 963619120.

HistoEnder: A 3D printer-based histological slide autostainer that retains 3D printer functions

Marco Ponzetti, Ganga Chinna Rao Devarapu, Nadia Rucci, Armando Carlone, Vittorio Saggiomo

HardwareX. 2022 Oct; 12: e00370. Published online 2022 Oct 23. doi: 10.1016/j.ohx.2022.e00370

PMCID:: PMC9636191

Article PDF–1.6M

<< First< Prev

Page of 155

Next >Last >>

Supplemental Content

Filter your results:

Manage Filters

PMC Images search for installed printer

Fig 3Mobile SMS printer in use.

Printer is installed in an exam room of a study antenatal clinic.

An Augmented SMS Intervention to Improve Access to Antenatal CD4 Testing and ART Initiation in HIV-Infected Pregnant Women: A Cluster Randomized Trial

PLoS One. 2015;10(2):e0117181.
Fig. 5

Structures fabricated as support materials (arrowheads). a To increase the contact area with the heating table of 3D printer, a plate-like support was installed. b To prevent deformation due to its own weight, a columnar support was installed

Utilizing a low-cost desktop 3D printer to develop a “one-stop 3D printing lab” for oral and maxillofacial surgery and dentistry fields

3D Print Med. 2018 Dec;4:6.
Figure 3

General view and detail of the printhead installed in three open-source desktop 3D printers: (A) kit BCN3D+, (B) factory-assembled Witbox2, (C) factory-assembled Sigma printer, and (D) the same Witbox2 with multiple printheads installed on it.

A Versatile Open-Source Printhead for Low-Cost 3D Microextrusion-Based Bioprinting

Polymers (Basel). 2020 Oct;12(10):2346.
FIGURE 1

Portable field unit with thermal printer and touchscreen installed in case.

Developing a portable field unit to improve well-child care

Public Health Action. 2022 Mar 21;12(1):24-27.